Please Call Us For Sales and Service : 9842247571, 9790047571

GRUNDFOS BOOSTER & PRESSURE PUMPS

Sanaventures is an Authorised Grundfos Pressure Pump Dealer in Karur. We deliver Grundfos Water Pressure Booster Pumps at an unbeatable price. We are supplying Grundfos products to all nearby areas like Erode, Salem, Tiruppur, Coimbatore, Ooty, Coonoor, Palakkad & more. Our utmost customer service makes us the best Grundfos Pressure Boosting Pump Dealer in Karur city.

For any queries about Pressure Pumps Series CM, CMBE Series, Scala Series, etc or any Service support call us @ +91 – 98422 47571

Grundfos Pressure Pumps in Karur

If anybody has a low water pressure issue at your home or commercial building in Karur? Even this could be caused by many of the reasons; Maybe shutoff valve isn’t open completely or maybe issue with your pressure regulator or clogged pipes or maybe your pipes are corroded or the problem with shared pipelines or maybe pipe leakages or etc., You can check all the possibility by yourself or by calling a technician. Still, if nothing could help you to solve your low-pressure problem; Then it’s the right time to call Sanaventures, A authorized Grundfos Pressure pump dealer in Karur to install Grundfos water pressure pumps at your place.

Why Grundfos Pressure Pumps are needed?

Grundfos Pressure pumps normally work as a pressure booster; it is generally used to increase the water pressure which is supplied to your commercial or residential areas. This type of Grundfos pressure Booster pump can resolve your problem and increases the water pressure immediately which comes out from the faucets. If you need to know more about the water Grundfos pressure Pumps which suits your requirement? then we are here! Sanaventures, A leading authorized Grundfos pressure pump dealer in Karur. Our professionals will help you to pick the right Grundfos pressure pumps for your need anywhere in Karur, Erode, Salem, Karur, Karur, Ooty, Coonoor, Palakkad & more.

How to choose a Grundfos Pressure pumps?

There are many primary specifications to be checked when selecting booster pumps you need that are pressure boost, flowrate, horsepower, power rating and etc.

Maximum flowrate:

It indicates the highest obtainable rate of volume discharge through the pump.

Maximum pressure boost:

It indicates the highest attainable pressure added to the existing pressure in the water system. The Pressure pumps provide the maximum pressure which is the pressure difference between the required system pressure and the existing pump pressure to supply the required flow rate. This maximum pressure is expressed as pounds per square inch (psi) or as feet head (ft).

Horsepower:

It’s a unit to measure the output power of the pump.

Power rating:

Power rating is the power demanded to operate the pumps and this is the product of the voltage (in volts or V) and current ratings (in amps or A).

How Does a Grundfos Water Pressure Pump Work?

Grundfos Water pressure boosting systems is regularly comprising of one or more pumps that are equipped in a booster system. It helps to raise the pressure in a system to a certain point independent of flow and inlet pressure. Every Water Pressure boosting system is available in different system configurations and each boosting system has various advantages and features.

Grundfos CM Pressure Booster Pumps

  • Horizontal multistage centrifugal pumps
  • CM pressure Booster pumps are of the close-coupled type
  • Grundfos CM Booster with Pressure Manager which provides reliable pressure boosting and water supply
  • All wetted parts in the CM pressure Booster pump are made up of stainless steel
  • CM pressure Booster pump built up with Hard Wearing Carbon / Ceramic seal
  • IP 55 Motor
  • Complies with Australian Water Quality Centre AS/NZS 4020 test for the products for use with drinking water

Grundfos Cm Water Pressure Booster Pump have some Unique features;

  • It is highly reliable and compact in design
  • Cm water pressure booster pump is built-in thermal protection
  • It is suitable for any Quiet operation and easy to install
  • Cm water pressure booster pump performance range is wider
  • Liquid temperature from 20 - 120 degrees Celsius
  • Adjustable cut-in pressure (PM2)
  • Generator friendly
  • F class insulation
  • Dry run protection
  • 80 start and stop /per hour
  • Leakage detection
  • For Rain showers
  • Shower panels
  • Body Showers
  • Building / Fire
  • Mine Dewatering / Groundwater / Sanitary
  • Food & Beverage / Water & Waste Water
  • Electro Coated cast iron parts are used and it is free from corrosions
  • High efficient motor and wider performance
  • Wear-resistant stainless steel and Long-life components which increase the competence

Grundfos CMBE Centrifugal Pump Booster System

The Grundfos CMBE centrifugal pump booster system is an all-in-one pack designed for use in domestic and commercial water application settings. Typical applications include raw-water supply, household pressure boosting, light irrigation, and general dewatering. The CMBE package ensures a constant supply of freshwater to a home or garden. Grundfos CMBE centrifugal pump booster all in one system which comprises the CME pump with an expansion tank, a pressure gauge, an integrated speed controller, an integrated frequency converter, a MLE motor, a 5-way fitting with a non-return valve, and a sensor. The Integrated speed controller in the booster system helps to keeps the pressure in the piping system constant while the sensor signals to the controller to change the speed.

  • CMBE centrifugal pump booster system is constructed with robust stainless steel while simultaneously being compact and easy to install.
  • CME pump with integrated frequency converter
  • 5-way fitting with non-return valve
  • Diaphragm tank
  • Pressure gauge & sensor
  • Integrated speed control maintains constant pressure and commercial-grade quality in one compact system
  • All-in-one a solution including pump, motor, tank, pressure and flow sensor, controller and check valve
  • Stainless steel design and easy installation
  • Minimal energy consumption and highly efficient ECM motor reduces operating charges
  • Noise the level below 55 decibels and even lower at a controlled speed
  • Dry-running protection
  • NSF 61/372 test approved for Drinking water

CMBE centrifugal pump boosters are designed for a wide range of applications;

  • Pressure boosting for home and gardening
  • Water supply for agriculture
  • Transfer and pressure boosting in break tank and Rainwater applications
  • Water supply from shallow wells

Grundfos SCALA pumps

The Grundfos SCALA pumps are fully integrated self-priming pressure water booster pumps which is designed for domestic use and ensures to deliver a constant supply of clean water to residential and light commercial applications.

Grundfos SCALA1 pumps

The Grundfos SCALA1 is an all-in-one self-priming fully integrated pressure booster. SCALA1 pressure boosting is designed for domestic and light-commercial applications like garden irrigation or pressure boosting to one and two-family houses or apartments.

Grundfos SCALA1 is a self-priming, multistage pump fully integrated pump and it can communicate with the Grundfos GO Remote app through a built-in Bluetooth technology. Hence it assures high customization options and makes this SCALA 1 pump to any application.

  • All-in-one integrated multistage booster Pump
  • Bluetooth communication enabled
  • External input
  • It can be easily set up as a twin booster, if any additional standby pumps needed
  • Low noise level < 55 dB(A).

Grundfos SCALA 2 pumps

The Grundfos SCALA2 is a fully integrated self-priming water booster pump that incorporated with integrated speed control helps to maintain perfect pressure in the taps.

SCALA2 booster pump is set up with an intelligent pump control which helps to automatically adjust operation to deliver the water pressure. Since GRUNDFOS SCALA2 is a fully integrated water booster pump, the integrated sensor identifies, if any of the inlet pressure changes or if many taps open and this helps to raise the pressure of the pump immediately. This combined action keeps the water pressure at all.

  • Intelligent pump control adjusts to provides perfect water pressure in all taps at all times.
  • All-in-one unit, Compact in size, and easy to operate
  • The sound level of SCALA2 is only 47 dB(A) and this is the quietest booster pump among the SCALA series.
  • User-friendly control panel for easy set-up
  • SCALA2 is designed for residential buildings for a single-family houses or apartments
  • Pressure Boosting from the water mains: It Increases the water pressure provided by city mains.
  • Pressure Boosting from tanks: SCALA2 water booster pump Increases water pressure from roof tanks, ground tanks, etc.
  • Pressure Boosting from wells: It Pumps the water from a depth of up to 8 meters well and Suitable for both indoor and outdoor installation.

Grundfos JPC pumps

The Grundfos JPC pump is a cost-efficient self-priming booster pump that is designed for covering a wide variety of domestic water and garden use purposes. The Grundfos JPC pump booster system is inclusive of a Grundfos JPC self-priming, single-stage jet pump, composite with PM1 Pressure Manager unit. The Grundfos JPC pump is a cost-efficient pump that can be used in many applications where self-priming operation is needed.

The Grundfos JPC pump is self-priming, the single-stage centrifugal pump has a composite body as well as an axial inlet and radial outlet. The Grundfos JPC pump body and interior components are made of technopolymer to make the pumps resistant to corrosion.

  • Grundfos JPC pump is a cost-efficient self-priming transfer pump and ideal for a large variety of installations.
  • This Grundfos JPC pump is ideal for transferring water from the wells or ground tanks and Strong suction capacity up to 7 meters.
  • The lightweight material of the pump assures great corrosion resistance to offer a very robust pump.
  • User-friendly interface with LED indicators which helps to shows, power on, pump running, and alarm indication
    • Built in thermal protection, Dry running protection, and cycling alarm.
  • Composite housing with stainless steel shaft for corrosion resistance
  • Suitable for above or underground rainwater tanks
  • Pressure boosting for domestic applications
  • Rainwater harvesting for domestic applications

Grundfos MAGNA3 Circulator Pumps

The MAGNA3 is the most efficient high-quality circulator pump that is designed for smaller and medium commercial applications. This Grundfos MAGNA3 is a range of light commercial heating circulator pumps with integrated latest pump control and management technology. This MAGNA3 circulator pump is fitted with permanent magnet (PM) technology to maximize reliability.

The Grundfos MAGNA3 AUTOADAPT setting will diagnosis the heating system regularly and continually monitors the pump's performance, and makes the adjustments accordingly. The MAGNA3 circulator pumps have a number of automatic functions that support the maximum efficiency and economic operation of the pump. Another advantage of this pump is the ability to interact using IR wireless technology and to operate and monitor using a smartphone. (The module that allows the communication has to be purchased separately).

The Grundfos UP Basic pumps are applicable for all circulation of liquid in domestic heating and hot water systems. These pumps are canned rotor-type pumps, i.e i.e. UP Basic pump and motor forms an integral unit without a shaft seal and with only two gaskets for sealing. The bearings of the Grundfos UP Basic pumps are lubricated by the pumped liquid. The 2-speed switch on the UP Basic motor lets you alter the speed of the pump to meet the needs of your system, thereby this Grundfos UP Basic pump reduces energy consumption and saving you money.

  • Autoadapt, Flowlimit, Flowadapt functions
  • Pump have Individual modes: constant pressure, temperature, curve, max. or min. curves
  • Automatic reduced night-time operation
  • Insulating shells supplied with single-head pumps for heating systems
  • Possibility to monitor heat distribution and power consumption in the system
  • The insulating cover is included & Easy optimization
  • No external motor protection required

Grundfos MAGNA3 circulator pump is built for all circulating liquids in:

  • Heating systems
  • Air conditioning and cooling systems
  • Domestic water systems
  • Ground-source heat pump systems
  • Solar heating systems

Grundfos COMFORT PM pumps

The Grundfos COMFORT PM pumps are a domestic hot water recirculation system that is designed for providing quick hot water at plumbing fixtures such as sinks, showers, and bathtubs, while simultaneously get rid of the waste of cold water. These COMFORT PM pumps are applicable for drinking water with corrosion-resistant pump housing for single- and two-family houses. The Grundfos COMFORT PM pumps are armed with a high-efficiency permanent-magnet motor.

These Grundfos COMFORT PM circulator pumps come with various pump housing versions and lengths integrated isolating and non-return valves or prepared for the subsequent fitting of such valves. The motor can be detached from the pump housing which enabling easy maintenance and replacement.

  • The Grundfos COMFORT recirculation pumps improve the efficiency and efficacy of household appliances including washing machines and dishwashers by having hot water available immediately.
  • 24-hour programmable timer setting provides the hot water during the peak demand times in the early morning or in the evening. Thereby Users can save energy with this setting.
  • A wet rotor design is a maintenance-free operation.
  • Grundfos COMFORT circulating pumps are corrosion resistance and extended product durability.
  • Grundfos COMFORT circulator pumps are designed for domestic hot-water systems in a single- and two-family house.
  • The pumps are suitable for open and closed systems, small heating systems, and cooling, air-conditioning systems.

GRUNDFOS SP submersible pumps

The GRUNDFOS SP stainless steel submersible pumps offer high efficiency, performance, and long life that the keys to the cost-effective borehole water supply. The GRUNDFOS SP range is your warranty for a high-quality water supply and this pump are able to handling flows up to 470m3/h and heads up to 810 m.

A complete GRUNDFOS SP system incorporates a stainless-steel submersible pump, an MS/MMS motor, a dedicated electronic motor protection unit, and a remote management system. The complete system guarantees to supply the water every time.

  • SP pumps are mainly used to pump the raw water from the underground. The GRUNDFOS SP pumps are installed in boreholes or wells, immersed below the water level.
  • Irrigation
  • Groundwater lowering
  • Pressure boosting
  • Fountain applications
  • Mining applications.
  • Off-shore applications

Grundfos Unilift AP pumps

The Grundfos Unilift AP drainage pump is a single-stage submersible pump that is built for the pumping of wastewater. The Grundfos Unilift AP pump can operate automatically as well as by manual operations. The Grundfos Unilift AP pump can able to pumping the wastewater thatcontains a particular quantity of solids waste, however not stones and similar materials, without being blocked or damaged. Also, this pump can be installed in a permanent installation location or it can be used as a portable pump.

Grundfos Unilift AP is a single-stage pump with either a semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Grundfos Unilift AP pumps are joined with a stainless steel sleeve for cooling during operation. The Grundfos Unilift AP pump strainer at the bottom restrain the particles larger than the pump is designed for from entering the pump. All Unilift AP pumps can be operated automatically or manually by using with or without float switch. The outlet of the pump is positioned at the top of the pump.

  • Most of the Grundfos Unilift AP, pump components are made of stainless steel.
  • Grundfos Unilift AP is High single-phase protection - no additional
  • motor protection is needed.
  • An optional non-return flap valve can be joined in the outlet in order to avoid backflow.
  • The clip-on strainer avoids the large particles enters into the pumps.
  • The Unilift AP Basic range is built for the submerged operation, either free-standing on the base plate or installed using an auto coupling. Also easy to install and handle.
  • Domestic effluents from septic and sludge-treating systems
  • Drainage wastewater and water from flooding
  • Effluents from the showers, washing machines, and sinks below sewer level
  • Liquids containing fibres from the light industries, laundries, etc.
  • Drainage wastewater from garage sprinkler systems
  • Water from the rivers and lakes

Grundfos UNILIFT KP pumps

The Grundfos UNILIFT KP pump is a stainless-steel submersible pump with hermetically sealed stator housing (canned motor), that is designed for pumping non-aggressive water and grey wastewater such as drainage and domestic effluents with particles up to 10 mm. The Grundfos UNILIFT KP pumps can be operated as a portable unit or stationary installation inside and outside the buildings. Grundfos UNILIFT KP is built to deliver up to 20,000 gallons per minute, this pumps are high-capable single-stage pump is optimized for demanding applications. Grundfos UNILIFT KP pumps are highly customizable and perfect for specialized, challenging applications, and available in a variety of materials.

  • Grundfos UNILIFT KP pumps are very convenient for automatic and manual operations. These pumps are exclusively made up of stainless steel.
  • UNILIFT KP pumps can be used in the permanent installation location, but it is also perfect for mobile usage. The cooling jacket is a partially submerged operation that helps the pump to operate without any interruption.
  • Grundfos UNILIFT KP pumps are the original drainage pump and the only wet runner on the market which makes it unique, it has a liquid-filled rotor and water-lubricated bearings. Even if the shaft seal discharge, the Grundfos UNILIFT KP pumps will still work without causing a short circuit.
  • The Grundfos UNILIFT KP pumps are very service friendly to extend pump life and easy to replace the pump parts like float switch, shaft sealing, impeller, and rotor.
  • Robust and sustainable stainless-steel design for all hydraulic parts
  • Comprehensive motor protection
  • Longitudinal, water-tight cables and glass-sealed cable sockets on the pump that avoids water from entering the motor through damaged cables and allows easy replacement.
  • For numerous applications within agriculture, horticulture and dairies, breweries, and the process industry.
  • To evaporating the cooling systems in Industrial and Commercial use.
  • It can be used for pumping in drainage collecting wells, pits inside and outside the building.
  • Emergency usage to drain flooded areas such as basements.
  • For backwater prevention to protect building basements and to clear the greywater from sanitary appliances.
  • To Emptying the water from the swimming pools, ponds, and tanks

Grundfos KPC 300 A and 600 A Pumps

KPC 300 A and 600 A are Submersible Grundfos Drainage Pumps (DP) which cover a motor range of 0.9-2.6 kW. These pumps can be used to handle solid particles up to 10 mm. The pumps are equipped with a semi-open multi-vane impeller and also, it is designed mainly for automatically operated for permanent domestic applications or can be used as a portable pump.

Grundfos KPC 300A and 600A pumps are designed by a Water-resistant technopolymer pump sleeve, impeller, and suction strainer, Stainless steel motor housing, rotor shaft, and screws. The Grundfos KPC 300A and 600A pump motor is a continuous-duty, submersible induction motor. The stator of the pump is joined in an airtight stainless steel motor housing encasing cabling, micro switch, and a capacitor. The pump has built-in thermal and current overload protection and a capacitor that is permanently in the circuit in the single phase version.

  • KPC is a robust, lightweight, compact and cost-efficient portable pumps.
  • Built-in thermal motor protection to avoid overheating and a mounted handle for easy transport is fixed.
  • Automatic level switch that helps to turns the pump on and off
  • Cooling jacket and stainless steel motor
  • It can also be used as a portable pump for lifting the water from tanks or rivers, emptying swimming pools, fountains, excavations, and underpasses.
  • These pumps are ideal for gardening and also for pumping rainwater and grey wastewater without fibres.
  • It can be automatically operated, fixed applications in domestic use, draining basements and garages subject to flooding.

Grundfos SEG Grinder Pumps

The Grundfos SEG sewage grinder pumps are designed for pumping effluent wastewater, sludge-containing water, and sewage for small communities or populated areas with no proper sewer systems. The SEG pump grinding system grinds the solid waste into small pieces so that; it led away through discharge pipes of a relatively small diameter. The SEG range of the pump reduces energy consumption and keeps downtime costs to the minimum while maintaining peak performance throughout the pump lifetime.

  • A newly developed cartridge shaft seal system, together with the polyurethane-sealed cable plug system avoids the liquid from penetrating into the motor.
  • High discharge pressure enables the transport of sewage over longer distances.
  • The new and powerful grinder system with easily replaceable parts reduce the downtime and facilitate quick and easy maintenance.
  • The unique SmartTrim impeller clearance adjustment system assures the optimum performance at all times.
  • New and efficient grinder system
  • Specially designed lifting handle
  • Watertight cable connection
  • Short motor shaft & Shaft seal
  • SmartTrim impeller adjustment
  • Stainless steel clamp & Motor protection
  • The heavy-duty ball bearings
  • Cast iron flange and feet

The SEG pumps are specially designed for use in:

  • Small towns, Municipalities, Areas with high groundwater
  • Farm areas and rocky terrains
  • Industries and Commercial Building

Grundfos SOLOLIFT and MULTILIFT Lifting stations

Grundfos has introduced the two lifting solutions, Grundfos SOLOLIFT and MULTILIFT, which are powerful wastewater removal solutions for all the residences and commercial buildings. It collects the wastewater and transfers it to the nearby sewer system. where draining by gravity is impossible or can only be realized at great expense. These lifting stations are optimal for all buildings as they set up drainage without depending on the location of the existing gravity-based drain system or where the gravity drain system is impossible or can only be realized at great expense.

MULTIFIT

Grundfos MULTIFIT lifting stations are compact and complete solutions that collect any kind of domestic wastewater from any kind of building and they are pre-assembled, pre-wired with footprints between 0,25 – 2m2. The Grundfos MULTIFIT lifting efficiency is to discharge is up to 100m3 of wastewater per hour.

    A Grundfos MULTILIFT solution gives you no-hassle wastewater disposal and the tanks of MULTILIFT are capable of managing high pressures with a thickness of up to 8mm. The lift station is equipped with vortex or grinder hydraulics. Vortex hydraulics assures minimal clogging while the grinder is used to cut solid waste into smaller pieces. It can be employed in all buildings with basements, septic tank drainage systems, and buildings on the hillside.

  • Special tanks, Lightweight with high capacity to manage extremely varying pressure
  • Single or double stations, Powerful and energy-efficient pumps with intelligent controls
  • Clog-free vortex hydraulics, Leakage, and odor -free operations
  • Highly reliable with fast and clean service
  • Prevents waterlogging during heavy rainfall

The Grundfos MULTIFIT lifting stations are designed for use in:

  • Direct connection of wall-hung or floor-standing toilets with horizontal outlet
  • Basement installation below the sewer level
  • Renovation or modernization of existing buildings for example to developing basements with fitness rooms, sauna, bath, washroom, etc.

Grundfos SOLOLIFT2 Lifting stations

The Grundfos SOLOLIFT2 is an exclusive range of ready-to-install automatic compact lifting stations with integrated powerful cutter systems that allows a drain of any domestic sanitary appliance wherever the gravity drain pipelines are not available or possible. The range of SOLOLIFT2 consists of 5 compact lifting stations for the disposal of domestic wastewater, 3 units are WC-1, WC-3, and CWC-3, which are designed to clear the wastewater from a toilet, and 2 units, C-2 and D-2, are designed to take the grey wastewater. The numbers of the series of SOLOLIFT2 imply how many additional inlet connections are possible.

    At GRUNDFOS SOLOLIFT2 WC-1, WC3, and CWC-3 macerator unit is an efficient cutter system with hardened steel blades with scissor cutting action. The continuously rated motor (S3 operation: 30 secs on, 30 secs off) with a high starting torque characteristic assures the cutter from blocked. The SOLOLIFT2 models can be linked to a distinct range of discharge pipe sizes like 22mm plastic, 22mm copper, plastic 32mm,40mm plastic, and etc.

  • Easy Installation, Replacement, Easy maintenance without having to remove the unit behind the toilet. The removable pump-motor unit assures fast and clean service.
  • The powerful motor with strong starting torque guarantees optimum operational reliability, even when for instance feminine hygiene products are sometimes flushed down the toilet.
  • Easy access to level switches, one access to maintenance, dry compact, and removable pump-motor unit
  • Components of the lift station are hot water-resistant up to 90°C for 30 minutes (C-3).
  • Carbon filter vent valve avoids the odor

The Grundfos SOLOLIFT2 Lifting stations are designed for use in:

  • To Renovate or Modernize the restrooms in offices and other commercial building needs.
  • Basement installations of sanitary units below sewer level and also as great backflow protection from the main sewer
  • Low-cost bathrooms in holiday cottages or and Attics even away from the drainage stack.
  • Extra bathrooms for the elderly or the disabled people

Grundfos Unilift CC pumps

Grundfos Unilift CC pumps are single-stage submersible drainage pumps with a suction capacity down to 3 mm water level. These pumps are designed for pumping clean, non-aggressive water and grey wastewater and applicable for pumping rainwater and municipal sewage from the washing machines, bathrooms, basements, gutters, tanks, etc. The pumps have both a top and a side outlet facilitate the easy adaptation to the existing pipework.

  • The horizontal or vertical outlet for easy installation or replacement purpose
  • This pump is suitable for low suction levels down to 3mm
  • Light-weight and Stainless steel strainer
  • The cooling jacket helps the pump to operate continuously while partially submerged
  • Comprehensive motor protection and Automatic venting for trouble-free startup after dry periods
  • Strong composite casing and stainless-steel strainer
  • Ceramic shaft to extend the lifetime of the pumps
  • Grundfos Unilift CC pumps are designed for pumping rainwater or grey wastewater to sewer mains from the basements of sanitary appliances like washing machines, wash basins, bathtubs, showers, sinks, etc.
  • Emptying of pools, ponds, and flooded basements.
  • Special pump version for media containing saltwater and chlorinated water.
  • Backwater prevention to protect the building basement.

Grundfos Hydro Pneumatic Pumps

Grundfos Hydro Multi-S booster systems consist of two or three identical Grundfos CM, CMV or CR pumps connected in parallel and mounted on a common base frame and a control cabinet with motor-protective circuit breaker and integrated controller. Hydro Multi-S booster systems are supplied as complete, pre-assembled and tested systems including suction and discharge manifolds, isolating valves, non-return valves, pressure gauge and pressure switches. To ensure reliable operation, the booster system must be fitted with a suitable diaphragm tank. The size of the diaphragm tank can be found on page 20. Automatic pump operation is based on system demand and controlled by pressure switches (one for each pump).

    When a tap is opened, water will be drawn from the diaphragm tank. The pressure will drop to the first cut-in pressure, and the first pump will cut in. As the consumption rises, more pumps will cut in until the performance of the pumps in operation corresponds to the demand. When the water consumption falls, the discharge pressure will rise to the cut-out pressure and the pressure switch will cut out one pump and as the consumption falls, more pumps will be cut out.

  • Maximum Head
  • Max Flow Rate
  • best quality range.
  • Corrosion resistant
  • Top performance
  • Blocks of flats
  • Hotels
  • Schools
  • High strength
  • Durable nature
  • Longer working life