Sanaventures is an Authorised Grundfos Pressure Pump Dealer in Coimbatore. We deliver Grundfos Water Pressure Booster Pumps at an unbeatable price. We are supplying Grundfos products to all nearby areas like Erode, Salem, Karur, Tiruppur, Ooty, Coonoor, Palakkad & more. Our utmost customer service makes us the best Grundfos Pressure Boosting Pump Dealer in Coimbatore city.
If anybody has a low water pressure issue at your home or commercial building in Coimbatore? Even this could be caused by many of the reasons; Maybe shutoff valve isn’t open completely or maybe issue with your pressure regulator or clogged pipes or maybe your pipes are corroded or the problem with shared pipelines or maybe pipe leakages or etc., You can check all the possibility by yourself or by calling a technician. Still, if nothing could help you to solve your low-pressure problem; Then it’s the right time to call Sanaventures, A authorized Grundfos Pressure pump dealer in Coimbatore to install Grundfos water pressure pumps at your place.
Grundfos Pressure pumps normally work as a pressure booster; it is generally used to increase the water pressure which is supplied to your commercial or residential areas. This type of Grundfos pressure Booster pump can resolve your problem and increases the water pressure immediately which comes out from the faucets. If you need to know more about the water Grundfos pressure Pumps which suits your requirement? then we are here! Sanaventures, A leading authorized Grundfos pressure pump dealer in Coimbatore. Our professionals will help you to pick the right Grundfos pressure pumps for your need anywhere in Coimbatore, Erode, Salem, Karur, Tiruppur, Ooty, Coonoor, Palakkad & more.
There are many primary specifications to be checked when selecting booster pumps you need that are pressure boost, flowrate, horsepower, power rating and etc.
It indicates the highest obtainable rate of volume discharge through the pump.
It indicates the highest attainable pressure added to the existing pressure in the water system. The Pressure pumps provide the maximum pressure which is the pressure difference between the required system pressure and the existing pump pressure to supply the required flow rate. This maximum pressure is expressed as pounds per square inch (psi) or as feet head (ft).
It’s a unit to measure the output power of the pump.
Power rating is the power demanded to operate the pumps and this is the product of the voltage (in volts or V) and current ratings (in amps or A).
Grundfos Water pressure boosting systems is regularly comprising of one or more pumps that are equipped in a booster system. It helps to raise the pressure in a system to a certain point independent of flow and inlet pressure. Every Water Pressure boosting system is available in different system configurations and each boosting system has various advantages and features.
Grundfos Cm Water Pressure Booster Pump have some Unique features;
The Grundfos CMBE centrifugal pump booster system is an all-in-one pack designed for use in domestic and commercial water application settings. Typical applications include raw-water supply, household pressure boosting, light irrigation, and general dewatering. The CMBE package ensures a constant supply of freshwater to a home or garden. Grundfos CMBE centrifugal pump booster all in one system which comprises the CME pump with an expansion tank, a pressure gauge, an integrated speed controller, an integrated frequency converter, a MLE motor, a 5-way fitting with a non-return valve, and a sensor. The Integrated speed controller in the booster system helps to keeps the pressure in the piping system constant while the sensor signals to the controller to change the speed.
CMBE centrifugal pump boosters are designed for a wide range of applications;
The Grundfos SCALA pumps are fully integrated self-priming pressure water booster pumps which is designed for domestic use and ensures to deliver a constant supply of clean water to residential and light commercial applications.
The Grundfos SCALA1 is an all-in-one self-priming fully integrated pressure booster. SCALA1 pressure boosting is designed for domestic and light-commercial applications like garden irrigation or pressure boosting to one and two-family houses or apartments.
Grundfos SCALA1 is a self-priming, multistage pump fully integrated pump and it can communicate with the Grundfos GO Remote app through a built-in Bluetooth technology. Hence it assures high customization options and makes this SCALA 1 pump to any application.
The Grundfos SCALA2 is a fully integrated self-priming water booster pump that incorporated with integrated speed control helps to maintain perfect pressure in the taps.
SCALA2 booster pump is set up with an intelligent pump control which helps to automatically adjust operation to deliver the water pressure. Since GRUNDFOS SCALA2 is a fully integrated water booster pump, the integrated sensor identifies, if any of the inlet pressure changes or if many taps open and this helps to raise the pressure of the pump immediately. This combined action keeps the water pressure at all.
The Grundfos JPC pump is a cost-efficient self-priming booster pump that is designed for covering a wide variety of domestic water and garden use purposes. The Grundfos JPC pump booster system is inclusive of a Grundfos JPC self-priming, single-stage jet pump, composite with PM1 Pressure Manager unit. The Grundfos JPC pump is a cost-efficient pump that can be used in many applications where self-priming operation is needed.
The Grundfos JPC pump is self-priming, the single-stage centrifugal pump has a composite body as well as an axial inlet and radial outlet. The Grundfos JPC pump body and interior components are made of technopolymer to make the pumps resistant to corrosion.
The MAGNA3 is the most efficient high-quality circulator pump that is designed for smaller and medium commercial applications. This Grundfos MAGNA3 is a range of light commercial heating circulator pumps with integrated latest pump control and management technology. This MAGNA3 circulator pump is fitted with permanent magnet (PM) technology to maximize reliability.
The Grundfos MAGNA3 AUTOADAPT setting will diagnosis the heating system regularly and continually monitors the pump's performance, and makes the adjustments accordingly. The MAGNA3 circulator pumps have a number of automatic functions that support the maximum efficiency and economic operation of the pump. Another advantage of this pump is the ability to interact using IR wireless technology and to operate and monitor using a smartphone. (The module that allows the communication has to be purchased separately).
The Grundfos UP Basic pumps are applicable for all circulation of liquid in domestic heating and hot water systems. These pumps are canned rotor-type pumps, i.e i.e. UP Basic pump and motor forms an integral unit without a shaft seal and with only two gaskets for sealing. The bearings of the Grundfos UP Basic pumps are lubricated by the pumped liquid. The 2-speed switch on the UP Basic motor lets you alter the speed of the pump to meet the needs of your system, thereby this Grundfos UP Basic pump reduces energy consumption and saving you money.
Grundfos MAGNA3 circulator pump is built for all circulating liquids in:
The Grundfos COMFORT PM pumps are a domestic hot water recirculation system that is designed for providing quick hot water at plumbing fixtures such as sinks, showers, and bathtubs, while simultaneously get rid of the waste of cold water. These COMFORT PM pumps are applicable for drinking water with corrosion-resistant pump housing for single- and two-family houses. The Grundfos COMFORT PM pumps are armed with a high-efficiency permanent-magnet motor.
These Grundfos COMFORT PM circulator pumps come with various pump housing versions and lengths integrated isolating and non-return valves or prepared for the subsequent fitting of such valves. The motor can be detached from the pump housing which enabling easy maintenance and replacement.
The GRUNDFOS SP stainless steel submersible pumps offer high efficiency, performance, and long life that the keys to the cost-effective borehole water supply. The GRUNDFOS SP range is your warranty for a high-quality water supply and this pump are able to handling flows up to 470m3/h and heads up to 810 m.
A complete GRUNDFOS SP system incorporates a stainless-steel submersible pump, an MS/MMS motor, a dedicated electronic motor protection unit, and a remote management system. The complete system guarantees to supply the water every time.
The Grundfos Unilift AP drainage pump is a single-stage submersible pump that is built for the pumping of wastewater. The Grundfos Unilift AP pump can operate automatically as well as by manual operations. The Grundfos Unilift AP pump can able to pumping the wastewater thatcontains a particular quantity of solids waste, however not stones and similar materials, without being blocked or damaged. Also, this pump can be installed in a permanent installation location or it can be used as a portable pump.
Grundfos Unilift AP is a single-stage pump with either a semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Grundfos Unilift AP pumps are joined with a stainless steel sleeve for cooling during operation. The Grundfos Unilift AP pump strainer at the bottom restrain the particles larger than the pump is designed for from entering the pump. All Unilift AP pumps can be operated automatically or manually by using with or without float switch. The outlet of the pump is positioned at the top of the pump.
The Grundfos UNILIFT KP pump is a stainless-steel submersible pump with hermetically sealed stator housing (canned motor), that is designed for pumping non-aggressive water and grey wastewater such as drainage and domestic effluents with particles up to 10 mm. The Grundfos UNILIFT KP pumps can be operated as a portable unit or stationary installation inside and outside the buildings. Grundfos UNILIFT KP is built to deliver up to 20,000 gallons per minute, this pumps are high-capable single-stage pump is optimized for demanding applications. Grundfos UNILIFT KP pumps are highly customizable and perfect for specialized, challenging applications, and available in a variety of materials.
KPC 300 A and 600 A are Submersible Grundfos Drainage Pumps (DP) which cover a motor range of 0.9-2.6 kW. These pumps can be used to handle solid particles up to 10 mm. The pumps are equipped with a semi-open multi-vane impeller and also, it is designed mainly for automatically operated for permanent domestic applications or can be used as a portable pump.
Grundfos KPC 300A and 600A pumps are designed by a Water-resistant technopolymer pump sleeve, impeller, and suction strainer, Stainless steel motor housing, rotor shaft, and screws. The Grundfos KPC 300A and 600A pump motor is a continuous-duty, submersible induction motor. The stator of the pump is joined in an airtight stainless steel motor housing encasing cabling, micro switch, and a capacitor. The pump has built-in thermal and current overload protection and a capacitor that is permanently in the circuit in the single phase version.
The Grundfos SEG sewage grinder pumps are designed for pumping effluent wastewater, sludge-containing water, and sewage for small communities or populated areas with no proper sewer systems. The SEG pump grinding system grinds the solid waste into small pieces so that; it led away through discharge pipes of a relatively small diameter. The SEG range of the pump reduces energy consumption and keeps downtime costs to the minimum while maintaining peak performance throughout the pump lifetime.
The SEG pumps are specially designed for use in:
Grundfos has introduced the two lifting solutions, Grundfos SOLOLIFT and MULTILIFT, which are powerful wastewater removal solutions for all the residences and commercial buildings. It collects the wastewater and transfers it to the nearby sewer system. where draining by gravity is impossible or can only be realized at great expense. These lifting stations are optimal for all buildings as they set up drainage without depending on the location of the existing gravity-based drain system or where the gravity drain system is impossible or can only be realized at great expense.
Grundfos MULTIFIT lifting stations are compact and complete solutions that collect any kind of domestic wastewater from any kind of building and they are pre-assembled, pre-wired with footprints between 0,25 – 2m2. The Grundfos MULTIFIT lifting efficiency is to discharge is up to 100m3 of wastewater per hour.
A Grundfos MULTILIFT solution gives you no-hassle wastewater disposal and the tanks of MULTILIFT are capable of managing high pressures with a thickness of up to 8mm. The lift station is equipped with vortex or grinder hydraulics. Vortex hydraulics assures minimal clogging while the grinder is used to cut solid waste into smaller pieces. It can be employed in all buildings with basements, septic tank drainage systems, and buildings on the hillside.
The Grundfos MULTIFIT lifting stations are designed for use in:
The Grundfos SOLOLIFT2 is an exclusive range of ready-to-install automatic compact lifting stations with integrated powerful cutter systems that allows a drain of any domestic sanitary appliance wherever the gravity drain pipelines are not available or possible. The range of SOLOLIFT2 consists of 5 compact lifting stations for the disposal of domestic wastewater, 3 units are WC-1, WC-3, and CWC-3, which are designed to clear the wastewater from a toilet, and 2 units, C-2 and D-2, are designed to take the grey wastewater. The numbers of the series of SOLOLIFT2 imply how many additional inlet connections are possible.
At GRUNDFOS SOLOLIFT2 WC-1, WC3, and CWC-3 macerator unit is an efficient cutter system with hardened steel blades with scissor cutting action. The continuously rated motor (S3 operation: 30 secs on, 30 secs off) with a high starting torque characteristic assures the cutter from blocked. The SOLOLIFT2 models can be linked to a distinct range of discharge pipe sizes like 22mm plastic, 22mm copper, plastic 32mm,40mm plastic, and etc.
The Grundfos SOLOLIFT2 Lifting stations are designed for use in:
Grundfos Unilift CC pumps are single-stage submersible drainage pumps with a suction capacity down to 3 mm water level. These pumps are designed for pumping clean, non-aggressive water and grey wastewater and applicable for pumping rainwater and municipal sewage from the washing machines, bathrooms, basements, gutters, tanks, etc. The pumps have both a top and a side outlet facilitate the easy adaptation to the existing pipework.
Grundfos Hydro Multi-S booster systems consist of two or three identical Grundfos CM, CMV or CR pumps connected in parallel and mounted on a common base frame and a control cabinet with motor-protective circuit breaker and integrated controller. Hydro Multi-S booster systems are supplied as complete, pre-assembled and tested systems including suction and discharge manifolds, isolating valves, non-return valves, pressure gauge and pressure switches. To ensure reliable operation, the booster system must be fitted with a suitable diaphragm tank. The size of the diaphragm tank can be found on page 20. Automatic pump operation is based on system demand and controlled by pressure switches (one for each pump).
When a tap is opened, water will be drawn from the diaphragm tank. The pressure will drop to the first cut-in pressure, and the first pump will cut in. As the consumption rises, more pumps will cut in until the performance of the pumps in operation corresponds to the demand. When the water consumption falls, the discharge pressure will rise to the cut-out pressure and the pressure switch will cut out one pump and as the consumption falls, more pumps will be cut out.